The Structure Of The Brazing Heat Exchanger Is Made Up
The brazing heat exchanger is composed mainly of the corrugated pipe between the front and rear panel. The component of the brazing heat exchanger is made up of sealing plate, sealing ring and damper.
Soldering type heat exchanger interface type can be customized according to the specific requirements of market and application. In the process of vacuum brazing, a welding point is formed at each contact point between the plate and the filling material (soldering solder). Using this design, the heat exchanger can be made up of two different channels or circuits. The sealing plate is used to seal the gap between the plate and the first and last pass.
The type, size, and pressure levels of the panel. Some are fitted with sealing rings to seal the gap between the channel plate and the damper. Some of the sealing rings and the first or last pass are combined.